Ever hit a perfect drive on the range, only to have your simulator tee wobble or break mid-swing? That small piece of plastic or rubber can make a huge difference in your virtual game. Choosing the right golf simulator tee might seem simple, but it’s actually a tricky task. Too soft, and your launch angle suffers. Too hard, and you risk damaging your expensive launch monitor or hitting mat.
Many golfers waste money on tees that just don’t hold up or provide consistent results indoors. You want accuracy and durability when you practice at home, not constant adjustments. This guide cuts through the confusion. We break down the best materials, heights, and styles designed specifically for the demands of a golf simulator setup.
By the end of this post, you will know exactly which tee setup will give you the most reliable ball flight and the longest life span. Get ready to stop worrying about wobbly setups and start focusing on lowering your scores. Let’s dive into finding the perfect foundation for your next great shot.
Top Tees For Golf Simulator Recommendations
- Package Contains: 10 x Tall Simulator Golf Tees + 10 x Short Golf Tees, total of 20 pieces, for indoor and outdoor driving practice, no more forcing plastic or rubber T-shirts into practice mats
- Reliable and Flexible: Ruyshu golf simulator tees are made of quality plastic material, hard to break, not easy to fade, which can accompany you for a long time.
- Adjustable Height: Two sizes are available for use, the height of the larger turf golf tees is 1 ¾ inches, and the height of smaller mat tees is ⅚ inches. The plastic golf tees provide options for common driver tee heights, and the higher golf tees can be trimmed to adjust the height
- Wide Uses: These winter golf tees suit can be applied in homes, yards, the golf training sites, outdoor and indoor activities, can also be applied in various golf driving ranges, golf course.
- Nice for Golf Practice: Fit for Beginners, golf players, golf lovers, The indoor golf tees holder are nice for your golf training and practice, helpful to improve your golf skills, a must have for all driving range warriors and golfers of all skill levels.
- New PRO SPEED+ (PLUS) version with an advanced “higher flex” polymer that provides enhanced Flexibility and Durability. These plastic golf tees are virtually unbreakable.
- Consistent height tees: includes 8 tees of varying height from 1/4" up to 2" with 1/4" incremental steps. Sizes included are 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2". Remember, these sizes are all ABOVE the ground so you can easily match to your regular golf tees, such as the 2 3/4" or 3 1/4" tee.
- The base diameter of tees #7 & #8 are a little smaller than the original version to be less detectable from overhead cameras in golf simulators. The larger cup area also makes it easy for juniors, seniors or golfers with adaptive needs.
- Works on any surface including golf courses, practice mats, gym floors, and even frozen ground. Perfect for an indoor golf simulator, as a driving range tee to play off the mat or grass, winter golf. or just use as your regular golf tee.
- Reusable, durable, and recyclable. BIRTEE PRO SPEED+ is already approved for the Rules of Golf. Made In Canada.
- ⛳TWO HEIGHT OPTIONS FOR DIFFERENT CLUBS:Includes 12 tall tees and 12 short tees with two ready-to-use ball heights. Choose the height that fits different clubs, swing styles and practice preferences.
- ⛳DESIGNED FOR SIMULATOR AND MAT PRACTICE:Built for golf simulators, hitting mats and artificial turf surfaces. These tees provide a convenient setup option for indoor golf practice, garage training and outdoor practice areas.
- ⛳TRIM-TO-FIT HEIGHT ADJUSTMENT:The 1.8-inch tall tees can be trimmed shorter when a different ball position is preferred. Adjust gradually to create your desired tee height for practice.
- ⛳24-PIECE VALUE PACK:Includes 24 reusable golf tees with 12 tall and 12 short pieces. Keep extra tees ready for simulator sessions, driving range practice and regular training.
- ⛳FLEXIBLE AND REUSABLE DESIGN:Made from flexible plastic for repeated practice. Suitable for home golf simulators, launch monitor setups, artificial turf, winter golf practice and training areas.
- 49-PIECE VALUE SET – Includes 49 simulator golf tees across 4 precise heights (0.8", 1", 1.5", and 1.75") and 3 distinct colors (Navy, White, Red). Provides an abundant supply for high-frequency indoor training, shared practice with friends, or long-lasting replacement backups.
- 4 FIXED HEIGHTS FOR EVERY CLUB & SWING – Specifically proportioned for every shot in your bag: 0.8" (7 pcs) for irons/wedges, 1.0" (14 pcs) for long irons/hybrids, 1.5" (14 pcs) for fairway woods, and 1.75" (14 pcs) for drivers. Dial in repeatable ball position and swing consistency effortlessly.
- HIGH-VISIBILITY 3-COLOR SYSTEM – Features 21 White, 14 Navy, and 14 Red tees designed for instant visual contrast on green turf, dark simulator mats, or artificial range surfaces. Easily identify your preferred height at a glance and spot tees instantly after impact.
- FLEXIBLE IMPACT-RESISTANT PLASTIC – Crafted from premium resilient plastic that flexes upon club impact to minimize friction and absorb hit force. Built to resist cracking, snapping, or fading through thousands of high-velocity swings, ensuring long-lasting performance for daily training.
- PERFECT FOR GOLF SIMULATORS & PRACTICE MATS – Designed specifically for indoor golf simulators, hitting mats, and home practice areas. No need to anchor it to the ground or pre-drill holes in the mat; it provides an authentic tee-box experience—just place it down and swing!
- 8 Fixed Heights:Includes 1/4, 1/2, 3/4, 1, 1-1/4, 1-1/2, 1-3/4 and 2 inch golf simulator tees. Multiple color options help match different turf surfaces and provide better visibility during golf practice
- Golf Simulator Tees for Mat Practice: no mat hole is required; Each tee stands directly on simulator mats, artificial turf, driving range mats and other flat practice surfaces for quick setup without ground insertion
- Preset Heights for Different Clubs: these simulator tees are fixed, not adjustable; Use lower options for iron practice, mid heights for hybrids and fairway woods, and higher positions for drivers, based on ball position and personal preference
- Flexible Ldpe and Color Options: these indoor golf simulator tees flex under repeated club impacts and help resist cracking or snapping; Multiple color choices let golfers select a set that contrasts with their practice mat or turf
- Repeatable Practice Setup: maintain the same ball position, compare swing results from a consistent setup and switch between lower and higher golf tee positions; For home simulators, winter practice and driving range mats; Tether and bag not included
- 49-PIECE VALUE SET: Includes 49 blue simulator golf tees in four fixed heights: 14 × 1.75 in, 14 × 1.5 in, 14 × 1.0 in, and 7 × 0.8 in. Multiple sizes make it easy to select the right tee height for different clubs and practice setups.
- FOUR HEIGHTS FOR DIFFERENT CLUBS:Choose from 0.8, 1.0, 1.5, and 1.75-inch tees to practice with irons, hybrids, fairway woods, and drivers. The fixed-height design provides a repeatable setup from swing to swing.
- WIDE TOP FOR EASY BALL PLACEMENT :The open-top design provides a broad contact area that helps keep the golf ball centered during setup, allowing you to spend less time positioning the ball and more time practicing your swing.
- SIX-LEG SUPPORT DESIGN : Six wide legs form a balanced base on artificial turf and hitting mats. The open construction distributes support around the tee while leaving room for clean club contact.
- FLEXIBLE REUSABLE PLASTIC : Made from flexible plastic for repeated practice sessions. Suitable for indoor golf simulators, hitting mats, practice nets, and driving-range setups.
- POWER PYRAMIDZ - BEST COST TO DURABILITY RATIO ON THE MARKET
- MAXIMUM POWER TRANSFER - Negative curvature beneath the ball cradle creates max clubhead clearance at impact. More energy into the ball. Longer drives.
- STABLE, REPEATABLE PLACEMENT - Wide base sits firm on any mat.
- 6 HEIGHTS (0.25”,1.0"–2.0") - Built for simulators, winter golf & hitting mats. Made in Canada.
- COMPATIBLE WITH RADAR & PHOTOMETRIC SYSTEMS - Built for simulators and winter golf. Check our Compatibility Guide before purchasing.
- New PRO SPEED+ (PLUS) version with an advanced “higher flex” polymer that provides enhanced Flexibility and Durability. These plastic golf tees are virtually unbreakable.
- Consistent height tees: includes 8 tees of varying height from 1/4" up to 2" with 1/4" incremental steps. Sizes included are 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2". Remember, these sizes are all ABOVE the ground so you can easily match to your regular golf tees, such as the 2 3/4" or 3 1/4" tee.
- The base diameter of tees #7 & #8 are a little smaller than the original version to be less detectable from overhead cameras in golf simulators. The larger cup area also makes it easy for juniors, seniors or golfers with adaptive needs.
- Works on any surface including golf courses, practice mats, gym floors, and even frozen ground. Perfect for an indoor golf simulator, as a driving range tee to play off the mat or grass, winter golf. or just use as your regular golf tee.
- Reusable, durable, and recyclable. BIRTEE PRO SPEED+ is already approved for the Rules of Golf. Made In Canada.
Your Guide to Picking the Best Tees for Your Golf Simulator
Using a golf simulator is fun! It lets you play your favorite courses anytime. To get the most accurate shots, you need the right gear. The small tee you use matters a lot. This guide helps you choose the perfect tees for your home setup.
Key Features to Look For
When buying simulator tees, some features stand out. These help your game and protect your equipment.
Durability and Longevity
- Strong Build: Good tees last a long time. They shouldn’t break after just a few swings. Look for tees made from tough materials.
- Consistent Height: The tee needs to hold the ball at the exact same height every time. This keeps your launch angle steady for better data.
Impact Absorption
- Soft Tops: The part that touches the ball should be soft. A hard top can mess up the ball’s flight path right off the bat.
- Flexibility: Some tees bend slightly when you hit them. This absorbs some shock, which is good for your club and the hitting mat.
Compatibility
- Mat Fit: Make sure the tee fits snugly into the hole on your simulator hitting mat. A loose fit causes wobbling.
- Height Adjustment: Some advanced users like tees that let you easily change how high the ball sits. This helps practice different shots, like drives versus irons.
Important Materials Matter
The material a tee uses changes how it performs. Different materials offer different benefits.
Rubber and Plastic
- Rubber Tees: These are very popular for simulators. Rubber grips the ball well and is gentle on your clubface. They usually last a long time, too.
- Hard Plastic Tees: These are cheap and common. However, hard plastic can sometimes slip out of the mat or feel too stiff.
Composite and Foam
- Composite Materials: These mix plastic and other materials for strength. They often offer a good balance between durability and flexibility.
- Foam Tips: Some high-end tees use foam on top. This material is excellent for absorbing impact and protecting your launch monitor if you accidentally hit it.
Factors That Improve or Reduce Quality
A few design choices make one tee better than another for simulator use.
What Makes a Tee Great (Improves Quality)
- Stable Base: A wide, flat bottom keeps the tee steady when you place it on the mat.
- Smooth Surface: Tees without rough edges or seams provide a cleaner strike.
- Grip Design: Some tees have grooves or special shapes near the top to hold the golf ball securely until impact.
What Makes a Tee Bad (Reduces Quality)
- Too Light: Very light tees can sometimes get knocked over easily when setting up the shot.
- Wobbly Fit: If the tee moves when you set the ball on it, your shot data will be unreliable.
- Brittle Material: Cheap plastic breaks easily, meaning you replace them often.
User Experience and Use Cases
How you use your simulator affects which tee you should buy.
Practice vs. Serious Play
- Casual Players: If you play for fun, a simple, durable rubber tee works great. You want something that does the job without costing too much.
- Serious Golfers: Those tracking every statistic need the most consistent tees. Look for high-precision tees that offer minimal vibration and perfect ball placement.
Hitting Mat Considerations
If you have a thick, heavy hitting mat, you might need a longer, sturdier tee post to ensure it sticks up correctly. If your mat is thin, a shorter tee might be better so the ball isn’t too high.
Simulator Tee Buying FAQs
Q: Do I need special tees just for a golf simulator?
A: Yes, generally. Traditional wooden tees can damage your hitting mat or launch monitor. Rubber or specialized plastic tees are safer for indoor use.
Q: How high should my golf ball be on the tee in a simulator?
A: This depends on your club. For a driver, the ball should sit about halfway above the top of your driver’s face. For irons, the ball should sit right on top of the mat, using a very short tee or a tee designed for irons.
Q: Will a broken tee hurt my golf club?
A: If a tee snaps during impact, the broken piece usually flies away harmlessly. However, hitting a hard plastic tee that doesn’t break might feel harsher on your clubface than hitting a soft rubber tee.
Q: Can I use the same tees inside and outside?
A: You can, but it is not recommended. Outdoor tees are often designed to stick into grass. Simulator tees are designed to fit into a mat hole securely.
Q: What is the biggest quality difference between cheap and expensive tees?
A: Expensive tees offer better consistency and material quality. They usually have better shock absorption and hold the ball more reliably, leading to more accurate shot readings.
Q: How often should I replace my simulator tees?
A: If you use rubber tees, they can last a long time. Check them often for cracks or severe wear. If you notice the ball wobbling or the tee leaning, it is time for a replacement.
Q: Are adjustable height tees worth the extra money?
A: If you practice different types of shots (driving, fairway woods, irons), adjustable tees save you time. They let you dial in the exact lie you need for that specific club.
Q: Do these tees affect the launch monitor data?
A: They can. A tee that wiggles or a tee with a very hard top can slightly alter the initial launch angle or spin rate recorded by the monitor.
Q: Should I use a tee for my irons in the simulator?
A: Usually, no. For irons, you typically place the ball directly on the hitting mat surface, or use a very small, specialized rubber stub tee if your mat requires it.
Q: Where is the best place to store my simulator tees?
A: Keep them near your setup, perhaps in a small cup or pouch. Because they are small, it is easy to misplace them between practice sessions!